A. Power of adhesion test Regent 2% sodium hydroxide Selected five samples of Aluminium tube Prepare 2 % NaOH Solution Fold the open end of the tube to cover the […]
This test applies only to lacquered aluminium tube Regent Copper sulphate solution mixed as follows Copper sulphate (Cuso4. 5H2O) 198.2 g Hydrochloric acid Conc. 51 ml Distilled water 1 litre […]
This test is performed with the help of a collapsibility tester instrument. Place the empty aluminium tube on the groove on the top of the auxiliary base plate, on the […]
The bioburden membrane filtration method is a microbiology test. the packaging material is a Laminate tube and aluminum tube. it is suitable for finishing products, bacterial growth, or fungal growth. […]
Take a selected sample of PVC/PE Film. Cut the sample into 10 x 10 cm or 5 x 5 cm it’s suitable with the help of a GSM Plate. Weight […]
Selected sample of the combination of layer-oriented polyamide-aluminum-heat Seal Lacquer layer cut 10 x 10 cm or 5 x 5 cm with the help of a GSM plate, then weighed […]
Take a selected sample of Alum/adhesive/PVC Film. Cut the sample into 10 x 10 cm or 5 x 5 cm it’s suitable with the help of a GSM Plate. Weight […]
Selected the label sample of the 5 samples. Measure the length and width with the help of a measuring scale, and note down the reading Carefully cut the sample release […]
Shippers are made from craft paper. They are mainly made from 3ply, 5-ply, and 7-ply paper, Take the sample of the shipper cut 10 x 10 cm with the help […]
A selected tagger seal sample cut the sample 10 x 10 cm or 5 x 5 cm it a suitable size with the help of a GSM Plate. At different […]