- Selected sample of Polyethylene terephthalate/aluminium/polyethylene triplex film cut 10 x 10 cm with the help of GSM Plate. Take weight at analytical balance and note reading
- Total Grammage= weight of sample in gram x 100 (if the sample cut in 10 x 10 cm )
- Dip the sample in the containing beaker in acetone completely and dip the sample in the solution for 10 – 15 min. The PE layer is separated from the PET and Aluminium layers. Take the PE layer dry in a hot air oven for 1 min at 750 Take weight at analytical balance and record reading,
- Grammage of PE Layer = weight of sample in gram x 100 (if the sample cut in 10 x 10 cm )
- After separating the layer from the PE layer remaining sample was dipped in 25% glacial acetic acid for 5 min. if the sample is not split, boil for 10 to 15 minutes after separating both layers. The PET and Aluminium layer dry the sample for 2 minutes in a hot air oven at 750 After taking weight at analytical balance and recording the reading.
- Grammage of aluminium layer= weight in gram x 100 (if the sample cut in 10 x 10 cm )
- Grammage of PET Layer= weight of sample in gram x 100 (if the sample cut in 10 x 10 cm )
I am Maneesh Maurya a professional pharmaceutical blogger from India having rich experience in the pharmaceutical Quality control field.
